IoT project
Write a professional report that describes the development of your group IoT
project.
The project should be a ‘stand-alone’ document presenting your design,
the step-by-step development, the Node-red diagram and an example of the use
of the IoT devise.
Task details Your assignment should contain the following:
• A title page with your project title and team details.
• An introduction paragraph that explains the purpose of the project and
the scope.
• A detailed description of your design and step-by-step method for
building your IoT Raspberry Pi project.
• Explanation of the limitations of your project.
• Summary and Conclusion
Outline/structure Use the following guide to structure your report.
Your report should include the following components:
• Title page
Include project title, team member names, student numbers, and each team
member’s role (i.e. coordinator, researcher, or designer).
• Table of contents
Include all of your sections from the introduction onwards and their page
numbers.
For a detailed work-through on how to do this see the following link:
• Report Body
• References
• Appendix/s
• Marking rubric
Report Body
The body of your report should include the following sections numbered as
indicated below.
1.0 Introduction
1.1 Purpose of this final report
In one or two sentences, describe the aim of your project, a basic outline of what
it covers.
1.2 Project scope
The scope states what your project can and cannot do depending of the method,
software and hardware used. You should finalise this section by presenting a
conclusion on the method and performance of your Raspberry Pi.
2.0 Materials
This is the list of all materials used in your project.
3.0 Methodology of assembling the IoT system
In this section you must describe three parts of the method followed to build
your IoT system.
3.1 Assembling the IoT system
This is the step-by-step method followed to put together the hardware used in
the IoT. It is suggested that bullet points are used to describe this part of the
methodology.
You can take pictures with your mobile phone to show how the
group put together the raspberry pi.
3.2 Programming the IoT system
This section is to describe the method used to develop the node red flow to
control the IoT system. You most include the exported Node red flow at the end
of this section.
4.0 Evaluation of the IoT system
Once you explain the process of building your IoT device, the next is to present
an evaluation of how the process was performed. If it is complex to build or the
improvements, you could do to make it better.
5.0 Conclusion
The conclusion should encompass the information you have provided in this
document. Include your thoughts on the method used and how far the aim was
achieved.
References (Coordinator)
You must use EndNote to create the references of your report
Formatting
Your document needs to be presented professionally using the following format
(look up Microsoft ‘Help’ for formatting instructions):
• Single document, MS Word.
• Margins: Top & Bottom (3.00cm), Left & Right (2.50cm)
• Body text: Times
Last Completed Projects
topic title | academic level | Writer | delivered |
---|