Design an object using CAD tools to solve a given problem, design it and 3D model and 3D print it. Try to make your design simple. Check the 3D file given to you.

Engineering Design & CAD (3%)
Explana@on:
In this assignment, students will design an object using CAD tools to solve a given problem, design it and 3D model and 3D print it. Try to make your design simple.
Check the 3D file given to you. You are an employee in ABC company and are required to design a joint or a piece that fits into the gap between the two gears to make them move . Design that piece, keeping in mind efficiency, simplicity and prac@cality.
The slab height is 10 mm, length is 96 mm and breadth is 113 mm. The leU gear has a diameter of 33.78 mm and the right gear has a diameter of 58.53 mm. The leU cylinder is almost 30 mm in height and the right cylinder is almost 10 mm in height . The distance between the two gears is around 36 mm.

Last Completed Projects

topic title academic level Writer delivered
© 2020 EssayQuoll.com. All Rights Reserved. | Disclaimer: For assistance purposes only. These custom papers should be used with proper reference.